• english
  • romanian
  • deutsch

PUBLICATII AMATUC

Titlu

link

1. An evolving plane stress yield criterion based on crystal plasticity virtual experiments  https://tcm.utcluj.ro/wp-content/uploads/2019/02/An-evolving-plane-stress-yield-criterion-based-on-crystal-plasticity-virtual-experiments.pdf

 

2. An Innovative Procedure for the Experimental Determination of the Forming Limit Curves  https://tcm.utcluj.ro/wp-content/uploads/2019/02/An-Innovative-Procedure-for-the-Experimental-Determination-of-the-Forming-Limit-Curves.pdf

 

3. Basic Research on Lattice Structures Focused on the Tensile Strength  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Basic-Research-on-Lattice-Structures-Focused-on-the-Tensile-Strength.pdf

 

4. BBC2005 Yield Criterion Used in the Numerical Simulation of Sheet Metal Forming Processes  https://tcm.utcluj.ro/wp-content/uploads/2019/02/BBC2005-Yield-Criterion-Used-in-the-Numerical-Simulation-of-Sheet-Metal-Forming-Processes.pdf

 

5. Capability of the BBC2008 yield criterion in predicting the earing profile in cup deep drawing simulations  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Capability-of-the-BBC2008-yield-criterion-in-predicting-the-earing-profile-in-cup-deep-drawing-simulations.pdf

 

6. Case Study for Replacing the DAM 6X40 Lathe with Doosan LYNX 220 Lathe for Processing the Part “Body of Spark Plug”  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Case-Study-for-Replacing-the-DAM-6X40-Lathe-with-Doosan-LYNX-220-Lathe-for-Processing-the-Part-Body-of-Spark-Plug.pdf

 

7. Customized implants with specific properties, made by selective laser melting  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Customized-implants-with-specific-properties-made-by-selective-laser-melting.pdf

 

8. Design and Analyses to Determine the Minimum Acting Force of a Gripper for Handling the Parts with Robots  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Design-and-Analyses-to-Determine-the-Minimum-Acting-Force-of-a-Gripper-for-Handling-the-Parts-with-Robots.pdf

 

9. Design and Analysis of Carbon/Epoxy Composite Tubular Parts  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Design-and-Analysis-of-CarbonEpoxy-Composite-Tubular-Parts.pdf
10. Design and manufacturing methodology for F1 nose car  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Design-and-manufacturing-methodology-for-F1-nose-car.pdf

 

11. Development of a new procedure for the experimental determination of the Forming Limit Curves  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Development-of-a-new-procedure-for-the-experimental-determination-of-the-Forming-Limit-Curves.pdf

 

12. Device for Training of Machine Tool Diagnostic Routines under Various Conditions  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Device-for-Training-of-Machine-Tool-Diagnostic-Routines-under-Various-Conditions.pdf

 

13. Dimensional Accuracy of the Molds Built on Rapid Prototyping under the Influence of the Investment Casting Heat Processes  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Dimensional-Accuracy-of-the-Molds-Built-on-Rapid-Prototyping-under-the-Influence-of-the-Investment-Casting-Heat-Processes.pdf

 

14. Effect of internal fluid pressure on quality of aluminum alloy tube in rotary draw bending  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Effect-of-internal-fluid-pressure-on-quality-of-aluminum-alloy-tube-in-rotary-draw-bending.pdf

 

15. Effect of the Blank-Holding Load on the Drawing Force in the Deep-Drawing Process of Cylindrical and Square Cups  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Effect-of-the-Blank-Holding-Load-on-the-Drawing-Force-in-the-Deep-Drawing-Process-of-Cylindrical-and-Square-Cups.pdf

 

16. Effect of the Deposition Conditions on Titanium Oxide Thin Films Properties  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Effect-of-the-Deposition-Conditions-on-Titanium-Oxide-Thin-Films-Properties.pdf

 

17. Effect of the Mechanical Parameters Used as Input Data in the Yield Criteria on the Accuracy of the Finite Element Simulation of Sheet Metal Forming Processes  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Effect-of-the-Mechanical-Parameters-Used-as-Input-Data-in-the-Yield-Criteria-on-the-Accuracy-of-the-Finite-Element-Simulation-of-Sheet-Metal-Forming-Processes.pdf

 

18. Environmentally friendly Manufacturing Processes in the Context of Transition to Sustainable Production  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Environmentally-friendly-Manufacturing-Processes-in-the-Context-of-Transition-to-Sustainable-Production.pdf

 

19. Estimating the Life-Cycle of the Medical Implants Made by SLM Titanium-Alloyed Materials Using the Finite Element Method  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Estimating-the-Life-Cycle-of-the-Medical-Implants-Made-by-SLM-Titanium-Alloyed-Materials-Using-the-Finite-Element-Method.pdf

 

20. Evaluation of Drawing Force and Thickness Distribution in the Deep-Drawing Process with Variable Blank-Holding  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Evaluation-of-Drawing-Force-and-Thickness-Distribution-in-the-Deep-Drawing-Process-with-Variable-Blank-Holding.pdf

 

21. Evaluation of Overall Efficiency of Devices with Worm Gear  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Evaluation-of-Overall-Efficiency-of-Devices-with-Worm-Gear.pdf

 

22. Experimental and Theoretic Research Regarding Extrusion Optimization for Reinforced Polyamide (PA 6.6 – 10 % GF) https://tcm.utcluj.ro/wp-content/uploads/2019/02/Experimental-and-Theoretic-Research-Regarding-Extrusion-Optimization-for-Reinforced-Polyamide.pdf


23. Experimental Research Regarding the Tensile Strength of some Reinforced Composite Materials  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Experimental-Research-Regarding-the-Tensile-Strength-of-some-Reinforced-Composite-Materials.pdf

 

24. Finite Element Analysis to Improve the Accuracy of Parts Made by Stainless Steel 316L Material Using Selective Laser Melting Technology  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Finite-Element-Analysis-to-Improve-the-Accuracy-of-Parts-Made-by-Stainless-Steel-316L-Material-Using-Selective-Laser-Melting-Technology.pdf

 

25. Finite Element Analysis to Predict the Mechanical Behavior of Lattice Structures Made by Selective Laser Melting Technology  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Finite-Element-Analysis-to-Predict-the-Mechanical-Behavior-of-Lattice-Structures-Made-by-Selective-Laser-Melting-Technology.pdf

 

26. How the Crystallization Process in Metal Casting is Influenced by the Mold Filling and Cooling Methods  https://tcm.utcluj.ro/wp-content/uploads/2019/02/How-the-Crystallization-Process-in-Metal-Casting-is-Influenced-by-the-Mold-Filling-and-Cooling-Methods.pdf

 

27. Improving the design of a wind turbine blade  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Improving-the-design-of-a-wind-turbine-blade.pdf
28. Industrial Parts for Investment Casting Built on the Rapid Prototyping Systems  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Industrial-Parts-for-Investment-Casting-Built-on-the-Rapid-Prototyping-Systems.pdf

 

29. Influence of Material Property Variability on the Thickness in Sheet Metal Subjected to the Hydraulic Bulging  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Influence-of-Material-Property-Variability-on-the-Thickness-in-Sheet-Metal-Subjected-to-the-Hydraulic-Bulging.pdf

 

30. Investigation on Feed Rate Influence on Surface Quality in Abrasive Water Jet Cutting of Composite Materials, Monitoring Acoustic Emissions  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Investigation-on-Feed-Rate-Influence-on-Surface-Quality-in-Abrasive-Water-Jet-Cutting-of-Composite-Materials-Monitoring-Acoustic-Emissions.pdf

 

31. Kinematic Process Plastic Cold Orbital Forming  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Kinematic-Process-Plastic-Cold-Orbital-Forming.pdf

 

32. Metallurgical and mechanical characterisation of titanium based materials for endosseous applications obtained by selective laser melting  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Metallurgical-and-mechanical-characterisation-of-titanium-based-materials-for-endosseous-applications-obtained-by-selective-laser-melting.pdf

 

33. Methods for Checking the Symmetry of the Formula One Car Nose  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Methods-for-Checking-the-Symmetry-of-the-Formula-One-Car-Nose.pdf

 

34. Mold Design for Polystyrene Plastic Anchor  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Methods-for-Checking-the-Symmetry-of-the-Formula-One-Car-Nose.pdf

 

35. Numerical and Experimental Approach of Cutting Temperatures to Green Turning of 42CrMo4 Steel  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Numerical-and-Experimental-Approach-of-Cutting-Temperatures-to-Green-Turning-of-42CrMo4-Steel.pdf

 

36. Phenomenological fracture model for biaxial fibre reinforced composites  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Phenomenological-fracture-model-for-biaxial-fibre-reinforced-composites.pdf

 

37. Predictive Performances of FLC Using Marciniak-Kuczynski Model and Modified Maximum Force Criterion  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Predictive-Performances-of-FLC-Using-Marciniak-Kuczynski-Model-and-Modified-Maximum-Force-Criterion.pdf

 

38. Quality of the Hydroformed Tubular Parts  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Quality-of-the-Hydroformed-Tubular-Parts.pdf

 

39. Research Concerning Chalk‘s Influence on Composite-Based Melamine’s Compressive Strength  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Research-Concerning-Chalk%E2%80%98s-Influence-on-Composite-Based-Melamines-Compressive-Strength.pdf

 

40. Research Concerning the Optimum Extrusion Temperature for Reinforced Polyamide  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Research-Concerning-the-Optimum-Extrusion-Temperature-for-Reinforced-Polyamide.pdf

 

41. Research on Abrasive Water Jet Milling of the Planar Surfaces, Slots and Profiles  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Research-on-Abrasive-Water-Jet-Milling-of-the-Planar-Surfaces-Slots-and-Profiles.pdf

 

42. Research on How Lens Position of the Optical System is Influencing the Mechanical Characteristics of the Metallic Parts Made by Selective Laser Melting Equipment  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Research-on-How-Lens-Position-of-the-Optical-System-is-Influencing-the-Mechanical-Characteristics-of-the-Metallic-Parts-Made-by-Selective-Laser-Melting-Equipment.pdf

 

43. Research on Improving the Outer Surface Quality of the Parts Made by SLM  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Research-on-Improving-the-Outer-Surface-Quality-of-the-Parts-Made-by-SLM.pdf

 

44. Research on Producing Complex Metal Parts with Lattice Structure by Selective Laser Melting  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Research-on-Producing-Complex-Metal-Parts-with-Lattice-Structure-by-Selective-Laser-Melting.pdf

 

45. Researches Regarding the Influence of Cutting Regime on Processed Surface in Aluminum Alloys Turning Process  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Researches-Regarding-the-Influence-of-Cutting-Regime-on-Processed-Surface-in-Aluminum-Alloys-Turning-Process.pdf

 

46. Selective laser melting of Ti6Al7Nb with hydroxyapatite addition  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Selective-laser-melting-of-Ti6Al7Nb-with-hydroxyapatite-addition.pdf

 

47. Studies on design of customized orthopedic endoprostheses of titanium alloy manufactured by SLM  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Studies-on-design-of-customized-orthopedic-endoprostheses-of-titanium-alloy-manufactured-by-SLM.pdf

 

48. Studies Regarding Redesign and Optimization of the Main Shaft of a Naval Winch  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Studies-Regarding-Redesign-and-Optimization-of-the-Main-Shaft-of-a-Naval-Winch.pdf

 

49. Surface Roughness Prediction During Dry Turning of Austenitic Stainless Steel AISI 304  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Surface-Roughness-Prediction-During-Dry-Turning-of-Austenitic-Stainless-Steel-AISI-304.pdf

 

50. Sustainable Manufacturing Through Environmentally-Friendly Machining  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Sustainable-Manufacturing-Through-Environmentally-Friendly-Machining.pdf

 

51. The Accuracy of the Plastic Parts Milling Process Executed by a Six Axes Robot  https://tcm.utcluj.ro/wp-content/uploads/2019/02/The-Accuracy-of-the-Plastic-Parts-Milling-Process-Executed-by-a-Six-Axes-Robot.pdf

 

52. The Analyses of Working Parameters for a 3D Complex Part Manufacturing by CNC Machine  https://tcm.utcluj.ro/wp-content/uploads/2019/02/The-Analyses-of-Working-Parameters-for-a-3D-Complex-Part-Manufacturing-by-CNC-Machine.pdf

 

53. The Geometry Equations for Multiple Kinematic Structures Using Direct Geometry  https://tcm.utcluj.ro/wp-content/uploads/2019/02/The-Geometry-Equations-for-Multiple-Kinematic-Structures-Using-Direct-Geometry.pdf

 

54. Using Simulation to Improve the Quality of the Metallic Industrial Components Made by Rapid Casting  https://tcm.utcluj.ro/wp-content/uploads/2019/02/Using-Simulation-to-Improve-the-Quality-of-the-Metallic-Industrial-Components-Made-by-Rapid-Casting.pdf